Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 13)

DIVA T/A ISDN Modem User’s Guide 13
Windows 95
Note: This install procedure is for the original release and Service
Pack 1 (SP1) version of Windows 95. If you are using Windows 95
Service Release 2 (OSR2), go to “Windows 95 (OSR2)” on page 15.
To verify the version installed on your machine, go to Control
Panel/System Properties and select the General tab. If you have the
original or SP1 version of Windows 95 installed, one of the following
screens appears:
Note: If you are using Dial-Up Networking, make sure you are using
version 1.2. If you are running a previous version, you must upgrade
to Dial-Up Networking 1.2, before you begin installing the DIVA T/A.
Dial-Up Networking 1.2 is located on the DIVA T/A CD under the
\MSDUN12 directory. Refer to your Windows 95 online help for
information on how to install Dial-Up Networking.
1 Power on your PC with the DIVA T/A modem connected (see
the section “Connecting the Cables” on page 9). Windows 95
automatically detects the DIVA T/A and the New Hardware
Found Window appears.
2 Insert the DIVA T/A CD into your computer’s CD drive.
3 In the New Hardware Found Screen, select Driver from disk
provided by hardware manufacturer, and click OK; the Install
From Disk window appears.