Hayes Microcomputer Products DIVA T/A ISDN User Manual
Page 24
DIVA T/A ISDN Modem User’s Guide 24
Windows 3.x/WFW 3.11
If you are installing the DIVA T/A ISDN Modem on a system without
a CD drive, it is possible to make disks from the DIVA T/A CD. To
create the disks, follow the instructions in the MAKEDISK.TXT file
located in the \WIN16\MAKEDISK directory of your DIVA T/A CD.
If you are going to use the DIVA T/A with RAS for WFW, RAS must
already be installed with at least one modem (any modem will do, it is
only needed to properly install the DIVA T/A and will later be
removed). If you do not want to use RAS, continue at “Installing the
DIVA T/A Software” on page 25.
1
Power on your PC with the DIVA T/A connected (See
“Connecting the Cables” on page 9).
2
Insert the DIVA T/A CD into your computer's CD drive, or the
DIVA T/A Win 3.x Setup disk 1 into your diskette drive.
3
With any text editor, open the file MODEM.INF found in the
Windows/System directory.
4
Open the file WFWNTEI2.INF found on the DIVA T/A CD
(\WIN16) or diskette.
5
Copy the contents of WFWNTEI2.INF to the end of the
MODEM.INF file; save the appended MODEM.INF file, and
exit your text editor.
6
Start the RAS setup program.
7
From the RAS setup, change the unused modem to the
DIVA T/A. Refer to the RAS online help to change modems.
Go to the section “Installing the DIVA T/A Software” on page 25.