Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 62)

DIVA T/A ISDN Modem User’s Guide 62
Key Function
F2 Selects a specific field. Press F2, and enter the letter
corresponding to the field you want to edit.
F4 Toggles between text (default) and graphics modes.
ESC Cancels your configuration setting (if a change was
made) or moves to the previous menu level (if no
change was made).
4 From Open Profile in the Main Menu, use the pull-down list to
select the profile you want to configure.
5 In the Protocols field of the Main Menu, specify the B-channel
protocol you want to use (note: the protocol must match the
protocol on the receiving system). For most connections,
Multilink PPP should be used. If it is not supported, PPP for
single B-channel connections, V.120 and V.110 can be used.
Both PPP and Multilink PPP require that a PPP communications
stack be installed on your computer.
Note: To obtain maximum Multilink PPP performance, you need
a PC equipped with a UART 16650 (you might need to install a
fast com port card), which supports COM port speed of 230.4
kbps (versus 115.2 kbps with 16550).
Note: Multilink PPP does not support the callback feature used
by some servers.
Warning: When using Multilink PPP for incoming calls, only
SPAP or PAP authentication is supported.
6 Select ISDN Parameters and press Enter.
*-----------------------------------------------------------------------------*
| DIVA T/A ISDN Modem – North American Version 1.7.0 |
| Copyright © 1997 Eicon Technology Corporation |
+-------------------------------------------------------------+---------------+
|MENU: ISDN Parameters |Choice: |
| |National ISDN-1|
| Switch Type: Auto-Detect |AT&T 5ESS |
|FIRST NUMBER |Auto-Detect |
| SPID: | |
| Directory Number: | |
| Non-Initializing: No | |
| | |
|SECOND NUMBER | |
| SPID: | |
| Directory Number: | |
| Non-Initializing: No | |
| | |
|<ESC> Previous menu | |
+-----------------------------------HELP----------------------+---------------+
| Sets the appropriate primary switch type to use during unit initialization. |
| Used with primary SPID and number.subaddress. |
| -Automatically selects National ISDN-1 or AT&T 5ESS. |
*-----------------------------------------------------------------------------*