Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 70)

DIVA T/A ISDN Modem User’s Guide 70
Updating the DIVA T/A Firmware
This section contains procedures for loading new firmware.
Updating Firmware under Windows
3.x/WFW 3.11
Warning: When you update your DIVA T/A firmware, the current
profile configurations might get erased. It is recommended, therefore,
that you record your current settings and SPID numbers before
updating (use the Windows Configuration Tool to view your current
settings).
Follow these steps:
1 Start the DIVA T/A Configuration Tool.
2 Select the DIVA T/A and click Properties.
3 Click Download and specify the appropriate path.
4 Confirm the request.
5 Verify the configuration of your DIVA T/A.
Updating Firmware under Windows NT
and 95/98
Note: When you download new firmware, DIVA T/A will ask you if
you want to export your current profiles. It is recommended that you
export the profiles. This assures you have a backup available in the
event the profiles are lost during the download. If the profiles do get
lost, use the Import Profile command and copy the exported profiles
back to the device.
To update your firmware:
1 From the DIVA Eicon Terminal Adapters Program, select the
DIVA Terminal Adapter to which you are going to download
new firmware.
2 From the File menu, select Download Firmware (or right click
your mouse, and then select Download Firmware).