Hayes Microcomputer Products DIVA T/A ISDN User Manual
Page 22
DIVA T/A ISDN Modem User’s Guide 22
6
Select the Eicon DIVA T/A ISDN Modem, then click Next.
7
Select the appropriate COM Port the DIVA T/A is connected
to. Click Next, then click finish.
8
Close the Modem Properties window.
9
After closing the Modem Properties window, you are
prompted to configure Dial-Up Networking, as the install
Modem list has changed. Click Yes to configure Dial-Up
Networking.
10
From the Remote Access Setup window, remove any unused
devices that use the same COM port as the DIVA T/A, and
then click Add.
11
In the Add RAS Device window, select the Eicon DIVA T/A
ISDN Modem from the drop-down list and click OK.
12
From the Remote Access Setup window, click Continue. You
will be prompted to shutdown and restart your computer. Click
No. Do not restart your system.
13
Go to page 25 and continue at the section “Installing the DIVA
T/A Software.”