Heat & Glo Fireplace EXCLAIM-36T-C - Manual (Page 25)

Heat & Glo • EXCLAIM-36C Woodburning Fireplace • 4013-093 Rev G • 08/06 25
8 8
Finishing
A. Hearth Extension
A hearth extension must be installed with all ¿ replaces to
protect the combustible À oor in front of the ¿ replace from
both radiant heat and sparks. See Figures 8.1 -8.5.
2 in. (51 mm)
required
High temperature
(300°F min.) continuous,
non-combustible sealant
Tile, stone or other
non-combustible material
Floor constructed of wood or
other combustible material
HX3 or HX4
Hearth Ext
or equivilent
insulation
(see Table below)
Fireplace
Protective
Metal Hearth
Strip
Figure 8.1 Hearth Extension Construction
1 in. (25 mm) overlap
Metal strips are placed 2 in. (51 mm) under the front
of the fireplace and must extend beyond the front
and sides of fireplace opening by 2 in. (51 mm).
Figure 8.2 Positioning the Protective Metal Hearth Strips
This ¿ replace has been tested and approved for use with a
hearth extension insulated to a minimum R value of 1.16.
To substitute materials for the factory-available hearth ex-
tensions, see Figure 8.3 and calculate insulation alterna-
tives as per Table 8.1 and the following formulas:
• Thermal conductivity per inch thickness = k
• k = (BTU)(inch) / (foot
2 )(hour)(°F)
• Required thickness = Rk
• Thermal resistance per inch thickness = r
• r = (foot
2 )(hour)(°F) / (BTU)(inch)
• Required thickness = R / rB.
66 in.
(1676 mm)
20 in.
(508 mm)
12 in.
(305 mm)
Figure 8.3 Hearth Extension Dimensions
Fire Risk
• Metal hearth strips MUST be installed.
Sparks or embers may ignite À ooring.
WARNING
Fire Risk
• Hearth extensions must be installed
exactly as speci ¿ ed.
High temperatures or hot embers may ignite
concealed combustibles.
WARNING
Table 8.1
Hearth Extension Insulation Alternatives, R Value = 1.16
Material
k per
inch
thick
r per
inch
thick
Minimum thickness
required
in. mm
Hearth & Home HX3, HX4 0.43 2.33 1/2 13
USG Micore 300™ 0.46 2.18 1/2 13
USG Durock™ Cement Board 1.92 0.52 2-1/4 57
Cement Mortar 5.0 0.20 5-7/8 149
Common Brick 5.0 0.20 5-7/8 149
Ceramic Tile 12.50 0.08 14-5/8 371
Armstrong™ Privacy Guard Plus .046 2.18 1/2 13
Marble
14.3 to
20.0
0.07 to
0.05
16-5/8 to
23-3/8
422 to
594