Reprinting a fax, To reprint a fax, To change the fax reprint settings – HP 2820 User Manual
Page 123
Reprinting a fax
If you want to reprint a fax because the print cartridge was empty or if the fax was printed on
the wrong type of media, you can try to reprint it. The amount of memory that is available
determines the actual number of faxes that are stored for reprinting. The most recent fax
prints first; the oldest fax that is in storage prints last.
These faxes are stored continuously. Reprinting them does not clear them from the memory.
To clear these faxes from the memory, see
To reprint a fax
Use the following steps to reprint a fax:
Note
You do not need to use this procedure if the fax does not print because of a jam or because
the media is completely depleted. During these situations, faxes are received to memory. As
soon as you clear the jam or replenish the media, fax printing automatically resumes.
1. On the device control panel, press
M
ENU
.
2. Press the
>
button once. Fax functions appears.
3. Press
E
NTER
.
4. Use the
<
or the
>
button until Reprint last appears.
5. Press
E
NTER
. The device begins reprinting the most recently printed fax.
Note
To stop the printing at any time, press
C
ANCEL
.
To change the fax reprint settings
The default fax reprint setting is On. To change this setting from the device control panel,
complete the following steps:
1. On the device control panel, press
M
ENU
.
2. Use the
<
or the
>
button to select Fax setup, and then press
E
NTER
.
3. Use the
<
or the
>
button to select Fax Recv. setup, and then press
E
NTER
.
4. Use the
<
or the
>
button to select Reprint faxes, and then press
E
NTER
.
5. Use the
<
or the
>
button to select On or Off, and then press
E
NTER
.
ENWW
Reprinting a fax
107