HP 2820 - Manual (Page 185)

4. Lift the imaging drum straight up to remove it from the device.
5. Remove the new imaging drum from its packaging.
6. Place the imaging drum on a firm surface, and then pull the orange rings to remove the
shipping pins.
7. Remove the orange shipping lock on each end of the imaging drum, and remove the two
orange shipping spacers.
8. Remove the orange cover from the imaging drum.
CAUTION Do not touch the surface of the roller or expose the roller to light for an extended period of
time. Doing so could cause print-quality issues.
9. Align the arrows on the side of the imaging drum with the arrows inside the printer.
ENWW Other: How do I? 169