HP 2820 - Manual (Page 224)

5. Remove the new print cartridge from its packaging, remove the orange cover from the
print cartridge, and then pull the orange tab straight out to remove the sealing tape.
6. Squeeze the blue release levers on the print cartridge, holding it with the roller facing
you. Lower the cartridge straight down into the carousel until it is firmly in place.
● If you need to replace another cartridge, close the top cover and the scanner
assembly, press
R
OTATE
C
AROUSEL
, and then repeat steps 4 through 6.
7. Close the top cover, and then close the scanner assembly.
Note If you have replaced a black print cartridge, the device prompts you to run a cleaning page.
208 Chapter 13 Managing supplies ENWW