HP 2820 User Manual
Page 187
3. Open the top cover, and then remove the image drum and set it aside.
4. With both hands, grasp the side of the media that is most visible (this includes the
middle), and carefully pull it free from the device.
5. When you have removed the jammed media, replace the image drum, and close the top
cover and the scanner assembly.
6. Return the fuser levers to their original upward position.
After clearing the media jam, you might need to turn the device off, and then turn it on again.
Note
When you add new media, remove all of the media from the input tray, straighten the stack
after adding the new media, place the stack in the tray, and then adjust the media guides..
To clear output area jams
If the media has jammed where it exits the device, complete the following steps.
CAUTION
Do not use a sharp object, such as a pencil or scissors, to remove jammed media.
1. Push the scanner-release button to open the scanner assembly, and then open the top
cover.
ENWW
Other: How do I?
171