Changing default settings – HP 2820 User Manual
Page 151
Changing default settings
The HP Color LaserJet 2840 all-in-one comes with default settings that were set at the
factory. You can change the default settings for photo printing from the device control panel.
Note
The default settings remain as selected until you change and save them again. If you want
to change the settings temporarily for a particular photo-printing job, see
.
1. Press
M
ENU
.
2. Use the
<
or the
>
button to select Photo Setup, and then press Enter.
3. Use the
<
or the
>
button to select one of the following menu items, and then press
E
NTER
.
●
Def. Image Size: Select this item to change the size of the image that you are
printing.
●
Def. # of copies: Select this item to change the number of copies that you want to
print.
●
Def. Output Color: Select this item to set whether you are printing in color or black
and white.
4. Use the
<
or the
>
button to change the setting, and then press
E
NTER
to save the change.
ENWW
Changing default settings
135