HP 2820 User Manual
Page 126
Making an extension telephone available to receive faxes
With this setting turned on, you can alert the device to pick up the incoming fax call by
pressing 1-2-3 sequentially on the telephone keypad (in tone-dial mode only). The default
setting is On. Turn this setting off only if you use pulse dialing or if you have a service from
your telephone company that also uses the 1-2-3 sequence. The telephone company
service does not work if it conflicts with the device.
To make an extension telephone available to receive faxes
1. On the device control panel, press
M
ENU
.
2. Use the
<
or the
>
button to select Fax setup, and then press
E
NTER
.
3. Use the
<
or the
>
button to select Fax Recv. setup, and then press
E
NTER
.
4. Use the
<
or the
>
button to select Extension Phone, and then press
E
NTER
.
5. Use the
<
or the
>
button to select On or Off, and then press
E
NTER
to save your
selection.
110
Chapter 8 Fax
ENWW