HP 2820 - Manual (Page 152)

Changing job settings
1. Insert the memory card into the device.
2. Press P
HOTO
.
3. Use the < or the > button to select Print photos.
4. Use the < or the > button to select Job settings.
5. Use the < or the > button to make selections for each of the following menu items, and
then press E
NTER
.
● Image Size: Change the size of the image that you are printing.
● Media Size: Change the media size that you are using.
● Paper type: Change the media type that you are using.
● # of copies: Change the number of copies that you want to print.
● Output color: Set whether you are printing in color or black-and-white.
6. Press E
NTER
to save the changes.
When you have finished changing the job settings, you can print your photos. See Printing
photos directly from the memory card or Printing photos from a proof sheet .
Note The settings return to their default value after the memory card has been removed. If you
want to change the settings permanently, see
Changing default settings .
136 Chapter 10 Photo ENWW