HP 2820 - Manual (Page 78)

Starting a copy job
To make copies with the device, use the following instructions.
1. Load your original document onto the flatbed scanner face-down (one page at a time)
with the upper-left corner of the document located in the lower-right corner of the glass.
OR
Load your original document face-up into the automatic document feeder (ADF) input
tray. The ADF is recommended for copying multiple-page documents.
2. Press S
TART
B
LACK
or S
TART
C
OLOR
on the device control panel to start copying.
3. Repeat the process for each copy.
For more detailed instructions about loading originals onto the flatbed scanner or into the
ADF input tray, see
Loading documents to scan .
Note If originals are loaded in the ADF input tray and are also on the flatbed scanner, the device
automatically scans from the ADF regardless of whether an original has been placed on the
flatbed scanner.
62 Chapter 7 Copy ENWW