2 example: reserving a system board delete, Example: reserving a system board delete – Fujitsu Siemens Computers SPARC Enterprise M8000 User Manual
Page 112
4-22
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
4.6.2
Example: Reserving a System Board Delete
FIGURE 4-11
Example: Reserving a System Board Delete
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the domain. Based on the operation status of the
domain, determine whether to perform the DR operation or change the domain
configuration.
3. Check the status of the system board to be deleted.
Execute the showboards(8) command to display system board information, and
then check the status of the system board to be deleted.
4. Reserve the deletion of the system board.
Execute the deleteboard(8) command to reserve deletion of the system board.
XSCF> showdcl -d 0
DID
LSB
XSB
Status
00
Running
00
00-0
01
01-0
XSCF> showboards 01-0
XSB
DID(LSB)
Assignment
Pwr
Conn
Conf
Test
Fault
------------------------------------------------------------------
01-0
00(01)
Assigned
y
y
y
Passed
Normal
XSCF> deleteboard -c reserve 01-0
Delete
Domain#0
XSB#00-0
XSB#01-0
Domain#0
XSB#00-0
XSB#01-0