Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 91)

4-1
C H A P T E R
4
Practical Examples of DR
This chapter provides examples of DR operations, such as the addition, deletion,
move, and replacement of system boards.
Each example shows an operation procedure using the command line interface of
the XSCF shell. Similar procedures can also be applied to DR operations using the
browser-based interface of the XSCF Web.
Note that the sections below explain only procedures such as those for checking the
status of components and devices for DR operations and not hardware operations
(e.g., installing, removing, and replacing system boards). Refer to the service manual
for each server as needed.
4.1 Flow of DR Operation
This section provides the flows of basic DR operations to add, delete, move, and
replace system boards, along with flow diagrams.