3 example: reserving a system board move, Example: reserving a system board move – Fujitsu Siemens Computers SPARC Enterprise M8000 User Manual
Page 113
Chapter 4
Practical Examples of DR
4-23
5. Check the reserved status of the system board.
Execute the showboards(8) command with the -v option specified to display
system board information, and then confirm that deletion of the system board
has been reserved.
6. Stop or reboot the domain.
This operation changes the domain’s configuration, reserving deletion of the
system board.
4.6.3
Example: Reserving a System Board Move
FIGURE 4-12
Example: Reserving a System Board Move
1. Login to XSCF.
2. Check the status of the move-source domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the move-source domain.
XSCF> showboards -v 01-0
XSB
R
DID(LSB)
Assignment
Pwr
Conn
Conf
Test
Fault
COD
--------------------------------------------------------------------------
01-0
*
00(01)
Assigned
y
y
y
Passed
Normal
n
XSCF> showdcl -d 1
DID
LSB
XSB
Status
01
Running
00
01-0
Move
Domain#0
XSB#00-0
XSB#01-0
XSB#00-1
Domain#0
XSB#00-0
XSB#01-0
XSB#00-1
Domain#1