Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 136)

A-20 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
[Remedy] Please contact customer service.
I/O callback failed in post-attach
[Explanation] I/O callback failed in post-attach
[Remedy] Please contact customer service.
Kernel Migration fails. 0x%x
[Explanation] Internal error happened during kernel migration.
[Remedy] Please contact customer service.
Failed to add CMP%d on board %d
[Explanation] CPU failed to power-on during DR attach.
[Remedy] Please contact customer service.
FMEM error = 0x<error code>
[Explanation] DR detects error during the copy rename operation.
[Remedy] Please contact customer service.
Cannot proceed; Board is configured or busy
[Explanation] Board cannot be disconnected because its status is busy.
[Remedy] Repeat the action; If the problem still exists, please contact customer
service.
drmach parameter is not a valid ID
[Explanation] ID parameter for status command is not a valid ID.
[Remedy] Correct the format of the ID parameter.
drmach parameter is inappropriate for operation
[Explanation] Parameter(s) for DR command specified incorrectly.
[Remedy] Correct the parameter(s).
drmach_node_ddi_get_parent: NULL dip
[Explanation] Internal error during DR operation.
[Remedy] Please contact customer service.
drmach_node_ddi_get_parent: NULL parent dip
[Explanation] Internal error during DR operation.