Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 71)

Chapter 3 DR User Interface 3-9
The following examples show displays of the showboards(8) command
■ Example 1 : Display of information on all system boards
Test Diagnostic status of system board
Unmount The system board is not mounted or cannot be
recognized because it is faulty.
Unknown The system board is not being diagnosed.
Testing testing.
Passed The system board was tested, and passed.
Failed A system board error was tested, and failed.
The system board cannot be used or has been
degraded.
Fault Normal/abnormal status of system board
Normal Normal.
Degraded Components have been degraded, but the system
board is operating. Degraded here means that a
system board included in the corresponding
component is faulty
.
Failed The system board cannot operate because of an error.
COD Indication of whether the system board is a COD board.
n The board is not a COD board.
y The board is a COD board.
XSCF> showboards -a
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
------------------------------------------------------------------
00-0 00(00) Assigned y y y Passed Normal
00-1 00(01) Assigned y n n Passed Degraded
00-2 SP Available y n n Unknown Normal
00-3 01(15) Assigned y y y Passed Normal
TABLE 3-8 Items of System Board Information to be Displayed (Continued)
Display items Description