Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 51)

Chapter 2 What You Must Know Before Using DR 2-19
The table below lists the status types available for individual management items.
XSCF changes and configures system board status according to the conditions under
which a system board is installed, removed, or registered in the DCL, or when a
domain is started or stopped. System board status also changes when the system
board is added, deleted, or moved by DR.
TABLE 2-4 System Board Management Items
Management item Status Description
Power Power Off The system board is powered off and cannot be
used.
Power On The system board is powered on.
Test unmount The system board is not mounted or cannot be
recognized, perhaps because it is faulty.
unknown The system board is not being diagnosed.
testing Testing
passed Passed
failed A system board error was detected and the board
has been deconfigured.
Assignment unavailable The system board cannot be used. The reason
might be one of the following:
- The board is faulty.
- The board is not listed in the domain’s DCL.
- The domain or board is not configured.
- The board is assigned to another domain.
available The system board can be used and is registered in
the domain’s DCL.
The system board is in this status when in the
system board pool.
assigned The system board is reserved or assigned to the
domain.
Connectivity disconnected The system board is disconnected from the
domain configuration and is in the system board
pool.
connected The system board is connected to the domain
configuration.
Configuration unconfigured The hardware resources of the system board have
been deleted from the Solaris OS.
configured The hardware resources of the system board have
been added into the Solaris OS.