Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 154)

B-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
Notice in the Memory section that 2048 MB (2GB) of physical memory is on this
board. And in the I/O Devices section the /dev/dsk/c0t3d0s1 disk contains a
configured swap space.
2. On the domain execute the swap(1M) command with its -l option specified to
determine the size of the swap space configured on the disk.
Notice that /dev/dsk/c0t3d0s1, the disk to be deleted, contributes 2097152
blocks. Each block is 512 bytes, so this disk contributes 1GB of swap space.
Moreover, the domain has additional swap space available from
/dev/dsk/c1t1d0s1
, a disk connected to another system board, which
contributes 6291456 blocks (3GB). Thus, the total available swap space is 4GB.
3. Execute the swap(1M) command with its -s option to determine the total value
of available swap space.
This amount could have been determined in the previous step, but you can use
the following command to get a brief summary of the details.
Notice that most of the 4GB of total swap space is available. When the system
board is deleted, 1GB of total swap space will be removed, and the remaining
available swap space will be nearly 3GB. Therefore, there is enough remaining
swap space to allow this system board to be deleted.
XSCF> showdevices 00-0
CPU:
----
DID XSB id state speed ecache
00 00-0 40 on-line 2048 4
00 00-0 41 on-line 2048 4
00 00-0 40 on-line 2048 4
00 00-0 41 on-line 2048 4
Memory:
-------
board perm base domain target deleted remaining
DID XSB mem MB mem MB address mem MB XSB mem MB mem MB
00 00-0 2048 0 0x0000000000000000 4096
IO Devices:
----------
DID XSB device resource usage
00 00-0 sd0 /dev/dsk/c0t0d0s1 swap area
# swap -l
swapfile dev swaplo blocks free
/dev/dsk/c0t3d0s1 118,1 16 2097152 2097152
/dev/dsk/c1t1d0s1 118,2 16 6291456 4109712
# swap -s
total: 40096k bytes allocated + 2200k reserved = 42296k used, 4152008k available