Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 127)

Appendix A Message Meaning and Handling A-11
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Cannot read property value: device node XXXXXX property: name
[Explanation] Fail to get the property from OBP.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Cannot read property value: property: scf-cmd-reg
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Cannot find mc-opl interface
[Explanation] DR cannot locate mc-opl driver's suspend/resume interface. mc-opl
is probably not loaded or incorrect version is used.
[Remedy] Please contact customer service.
Cannot find scf_fmem interface
[Explanation] DR cannot locate SCF driver's FMEM interface functions. SCF is
probably not loaded or incorrect version is used.
[Remedy] Please contact customer service.
Device busy: dr@0:SBX::pciY
[Explanation] Some devices are still referenced.
[Remedy] Confirm that all devices in this pci slot are not in use and repeat the
action. If this error message appears again, please contact customer service.
[Output] Console and Standard Output
Device driver failure: path
[Explanation] The device driver failed in attach or detach operation.
[Remedy] Repeat the action. If this error message appears again, please contact
customer service.
[Output] Console and Standard Output
Error setting up FMEM buffer