FARGO electronic DTC500 - Manual (Page 159)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 159
Using the Split 1 Set of Ribbon Panels option (DTC520/DTC525
only)
Use this option to provide the most economical means of printing a dual-sided card since a
single set of Ribbon panels is essentially split to print both the front and backsides of a card.
Step Procedure
1 Select this option to automatically print full-color (on the front of a card) and resin
black (on the back of a card), using either of the Full-Color YMCKO or YMCKOK
print Ribbons.

YMCKO Ribbon type usage: The front of the card is printed with the
Ribbon's YMC and O panels and the back is printed with the K panel.

YMCKOK Ribbon type usage: The front of the card is printed with the
YMCKO panels and the back is printed with the second K panel.
(Note #1: This option is automatically enabled when the YMCKOK Ribbon type
is selected.)
(Note #2: The Print Both Sides option is automatically enabled when this
option is selected.)