FARGO electronic DTC500 - Manual (Page 280)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 280
Section 10 DTC500 Enhancement Kit
Instructions Overview
The DTC500 Enhancement Kit includes several easily installed items that will enhance the
functionality of your DTC500 Series Card Printer. Please refer to these instructions to install
each of the items in this kit. These instructions will walk you through installing these
enhancements into Printers that are still in their factory packaging. If the Printer is already
unboxed and set up, ignore the steps (provided in this document) that refer to unpacking and
repackaging the Card Printer.
If you have any questions, please feel free to contact FARGO Electronics Support Services
online at:
http://www.fargopartner.com/support_services/online_support.asp
Reviewing the Parts (included with the Kit; 1 set per Card Printer)
Description Part Number Description Part Number
Poly bag 260176 Card Weight(s)
(2 for DTC515/525)
D850448
Software Installation
CD 510805 TOF Card Sensor
Retention Bracket D850455
DTC5XX Firmware
Update Diskette 510858 Plastite screw F000177
Retainer Clip 897144 Quick Start Guide L000107
Main Pulley D850190 Top Cover Media
Loading Label L000108
Card Input Hopper 1 D850253-01 Input Hopper Door
Label L000188
Card Input Hopper 2
(DTC515/525) D850253-02 Yellow Cardboard
Cleaning Cartridge
Insert L000160
Cleaning Cartridge
Assembly D850254 Upgrade Instruction
Disk L000196
Card Feed Roller (1) D850415 Snap Ring (2)
E-Clip (2)
140048
140062