FARGO electronic DTC500 - Manual (Page 296)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 296
Installing the new Card Input Hopper in the dual Hopper units
(DTC515/525)
Step Procedure
1 Remove the Card Input Hopper 1 (D850253-01) first. See below.
2 a. View the Printer from the Card Input Hopper.
b. Remove the three (3) screws that hold the Card Input Hopper to the Frame,
as shown below.
Continued on the next page