FARGO electronic DTC500 - Manual (Page 217)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 217
Selecting the Card Size
Select either the CR-80 or CR-79 for the appropriate card size option from the two (2)
standard card sizes.

When designing a card format, always set the card size or page size within the card
design program to the exact Print Length and Width dimensions listed in the Printer
driver.

The dimensions of the total print area for each card size will appear in the Print Width and
Print Length boxes.
Step Procedure
1 Select CR-80 to print onto standard "credit card" sized cards.
OR
Select CR-79 to print onto slightly smaller CR-79 sized cards (3.303
”
L x
2.051W/83.9mm L x 52.1mm W).

The CR-79 card adhesive-backed card is used in applications where they are
printed and applied to thicker proximity cards.

Make a simple card size adjustment to the Printer's Card Thickness
Adjustment Lever if printing with CR-79 sized cards to decrease the accepted
card thickness.
2 Select either the inches or mm radio button (as needed).
Continued on the next page