FARGO electronic DTC500 - Manual (Page 253)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 253
Selecting from the Menu Option Structure Tree
MENU
Input: Single / Dual
Card Sensor: On / Off
Exception Feed: On / Off
Mag: None / Installed
Smart: None / Installed
Prox: None / Installed
Position: CR-80
Magnetic TOF
Current Value X
-99 min +99 max
Current Value X
-99 min +99 max
Current Value X
-25 min +25 max
Current Value X
+2400 min +3600 max
Current Value X
-99 min +99 max
19200
9600
Level
Encoder Angle
Current Value X
-99 min +99 max
Current Value X
-10 min +10 max
PRINT RIBBON
Type: XX
Prints Remaining:
Not Available
Part Number: XX
Lot Number:
Not Available
SELECT FUNCTION
Print Test Image
Setup Printer
Report Supplies
Show Error Count
Show Card Count
System Upgrade
Print TOF
Print EOF
Ribbon Tension
Head Resistance
Image Darkness
Encoder Settings
Hopper Settings
BAUD Rate Settings
Flipper Offset
CHANGE PARAMETER
Gray/Align YMC/K
Color/Resin YMCK
Standard Resin
Magnetic Test
Card Count
SELECT TEST IMAGE
SUPPLIES REPORT
Print Ribbon
EXCEPTION LOG
Type of Error
Occurrences: XX
Example:
Wrong Print Ribbon
Occurrences: 2
Error Log End
CARD STATISTICS
CC: XX PC: XX
SYSTEM UPGRADE
Are you sure you
want to continue?
Yes NO