Using the rotate front by 180 degrees option – FARGO electronic DTC500 User Manual
Page 162
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
162
Using the Rotate Front by 180 Degrees option
Use this option to change the position of the printed image in relation to the set location of a
card's Magnetic Stripe or smart chip.
Step
Procedure
1
Select the Rotate Front 180 Degrees option to rotate the image on the front of
the card by 180 degrees when printed.
Advertising