FARGO electronic DTC500 - Manual (Page 304)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 304
Upgrading the Firmware to Version 1.5.1 (continued)
Step Procedure
3 Prepare the PC.
a. Insert the DTC5XX Firmware Update Disk into the Computer's Diskette
Drive.
b. In Windows, open the Firmware Updater Program from the Windows Start
Menu, as shown below.
c. Click on the Select Update File button, as shown below.
d. Navigate to the 5DTC151.S19 Firmware file on the diskette. Select it and
click on Open.
e. Click on Select Printer button, as shown below.
f. Select DTC510-515/ DTC520-525 and click on OK.
Continued on the next page