FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 129)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 129
5.1.4.2 ether lldp info
Function Set LLDP information which is sent
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> lldp info port-description <mode>
ether <number> lldp info system-name <mode>
ether <number> lldp info system-description <mode>
ether <number> lldp info system-capabilities <mode>
ether <number> lldp info management-address <mode>
ether <number> lldp info port-vlan-id <mode>
ether <number> lldp info port-and-protocol-vlan-id <mode>
ether <number> lldp info vlan-name <mode>
ether <number> lldp info protocol-identity <mode>
ether <number> lldp info mac-phy-configuration-status <mode>
ether <number> lldp info power-via-mdi <mode>
ether <number> lldp info link-aggregation <mode>
ether <number> lldp info maximum-frame-size <mode>
Options
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
port-description
system-name
system-description
system-capabilities
management-address
port-vlan-id
port-and-protocol-vlan-id
vlan-name
protocol-identity
mac-phy-configuration-status
power-via-mdi
link-aggregation
maximum-frame-size