FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 230)

XG Series User's Guide Chapter 5 Command Reference
Loop Detection Information Settings 230
5.11 Loop Detection Information Settings
This section explains about Loop Detection information settings.
5.11.1 Loop Detection Information
This section explains about the commands related to Loop Detection information.
5.11.1.1 loopdetect use
Function Set the Loop Detection function.
Available Model XG0224 / XG0448 / XG2600
Syntax loopdetect use <mode>
Options
<mode>
• on
Enable the Loop Detection function.
• off
Disable the Loop Detection function.
Use Mode Configuration mode (admin class)
Explanation Set whether or not to enable the loop detection function.
Default It is assumed that the loop detection function is disabled.
loopdetect use off