FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 276)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 276
5.15.1.23 snmp user read
Function Sets MIB read permission view.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [<number>] read <access> [<view_number>]
Options
<number>
• User ID
User ID expressed as a base 10 value from 0 to 7. Default is 0.
<access>
Sets MIB read permission view.
• all
Read permission is granted on all supported MIBs.
• none
MIB read permission is not granted.
• view
Use the MIB view information set with the "snmp view subtree" command.
<view_number>
Specifies the
"snmp view subtree" command's MIB view ID number, expressed as a base
10 value from 0 to 7. The view ID can only be set when view is specified for the <access>
option.
Use Mode Configuration mode (admin class)
Explanation Sets MIB read permission view in SNMPv3.
If a
"snmp view subtree" command definition corresponding to the view ID set does not
exist, MIB read permission is not granted.
Default If unset, read permission is granted on all supported MIBs.
snmp user <number> read all