FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 483)

XG Series User's Guide Chapter 5 Command Reference
LLDP Counter, Log, Statistics, and Status Display and Clear Operation
Commands
483
9) LLDP send information
Setting value by lldp info command
P
: Send Port Description TLV
N : Send System Name TLV
D : Send System Description TLV
C : Send System Capabilities TLV
A : Send Management Address TLV
- : disable
10) IEEE802.1 LLDP send information
P : Port VLAN ID
p : Port And Protocol VLAN ID
N : VLAN Name
I : Protocol Identity
- : disable
11) IEEE802.3 LLDP send information
M : MAC/PHY Configuration/Status
P : Power Via MDI
L : Link Aggregation
F : Maximum Frame Size
- : disable
12) SNMP Trap notification
T : SNMP Notification Trap
- : disable
13) Chassis ID information
Value which is sent with Chassis ID TLV
subtype= : subtype value (4 is MAC address)
info=
: representative MAC address
14) Port ID information
Value which is sent with Port ID TLV
15) LLDP TTL information (s) information
Value which is sent with Time To Live (TTL) TLV
16) Port description information
Value which is sent with Port Description TLV
When port-description is disabled by lldp info command, this value is not
displayed.
17) System name informationiweowqerwuwqurwqrqwr
Value which is sent with System Name TLV
When system-name is disabled by lldp info command, this value is not
displayed.
18) System description information
Value which is sent with System Description TLV
When system-description is disabled by lldp info command, this value is not
displayed.