FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 91)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 91
5.1.1.2 ether use
Function Set the port use.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> use <mode>
Options
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
Specify a port operation mode.
• on
Use the Ethernet port.
• off
Do not use the Ethernet port.
Use Mode Configuration mode (admin class)
Explanation Set to use the Ethernet port.
Default It is assumed that the Ethernet port is used.
ether <number> use on