FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 93)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 93
5.1.1.4 ether mode
Function Set the link speed.
Available Model XG0224 / XG0448
Syntax ether <number> mode <speed>
Options
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
<speed>
Link speed
• auto
Determine the link speed through auto negotiation.
• 1000
Set the 1Gbps fixed link speed.
• 100
Set the 100Mbps fixed link speed.
• 10
Set the 10Mbps fixed link speed.
Use Mode Configuration mode (admin class)
Explanation Set the link speed at the Ethernet port.
Caution Use the 100Mbps fixed link speed setting if using the 100BASE-FX module.
Default It is assumed that Auto Negotiation mode has been specified.
Range Model
1 to 24 XG0224
1 to 48 XG0448
ether <number> mode auto