FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 97)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 97
5.1.1.8 ether type
Function Set a port type.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> type normal
ether <number> type mirror <count> <source> <mode>
ether <number> type linkaggregation <group>
ether <number> type backup <group> <priority>
Options
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
normal
: Normal port
mirror : Target mirroring port
linkaggregation : Link aggregation port
backup
: Backup port
<count>
• Definition number
Specify the source port number with a decimal number.
<source>
• Source port number
Set the source port number with a decimal number if mirroring has been specified.
<mode>
• Mirroring mode
Set one of the following operation modes if mirroring has been specified.
rx
: The receive frames of the source port are mirrored.
tx : The send frames of the source port are mirrored.
both : Both the send and receive frames of the source port are mirrored. [XG0224/XG0448]
Range Model
0 to 25 XG0224
0 to 51 XG0448
0 to 25 XG2600
Range Model
1 to 26 XG0224
0 to 52 XG0448
0 to 26 XG2600