FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 282)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 282
5.15.2.3 syslog pri
Function Set the severity level output to the switch syslog.
Available Model XG0224 / XG0448 / XG2600
Syntax syslog pri <mode>
Options
<mode>
• Priority
Specify the priority to output system log information from the following. When
specifying multiple numbers, separate them with commas (,).
- error
Specifies a severity level of LOG_ERROR will be output to the switch syslog.
- warn
Specifies a severity level of LOG_WARNING will be output to the switch syslog.
- notice
Specifies a severity level of LOG_NOTICE will be output to the switch syslog.
- info
Specifies a severity level of LOG_INFO will be output to the switch syslog.
Use Mode Configuration mode (admin class)
Explanation Specify the severity level output to the switch syslog.
Default It is assumed that "error", "warn" and "info" are specified.
5.15.2.4 syslog facility
Function Set a system log information facility.
Available Model XG0224 / XG0448 / XG2600
Syntax syslog facility <num>
Options
<num>
• Facility
Set a system log information facility with a decimal value from 0 to 23.
Use Mode Configuration mode (admin class)
Explanation Specify a system log information facility.
Default It is assumed that 0 has been specified.
syslog facility 0