FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 217)

XG Series User's Guide Chapter 5 Command Reference
STP Information 217
5.8 STP Information
This section explains about STP information.
5.8.1 STP Information
This section explains about the commands related to STP information.
5.8.1.1 stp mode
Function Set the STP (Spanning Tree Protocol) operation mode.
Available Model XG0224 / XG0448 / XG2600
Syntax stp mode {disable | stp | rstp | mstp }
Options
disable
• Specify when STP is not used.
stp
• Specify when STP (dot1d) is used.
rstp
• Specify when RSTP (dot1w) is used.
mstp
• Specify when MSTP (dot1s) is used.
Use Mode Configuration mode (admin class)
Explanation Set the STP (Spanning Tree Protocol) operation mode.
Default It is assumed that the STP is set for STP operation mode.
stp mode stp