2 vlan ip6qos aclmap, Vlan ip6qos aclmap, Vlan ip6qos – FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 178: Aclmap
XG Series User's Guide
Chapter 5 Command Reference
VLAN Information Settings
178
You can expand the upper limit to use
"resource filter distribution"
resource distribution.
Note 4.
Up to 700 commands can be set for the entire device, including the definitions which refer
to ACL such as
,
and "serverinfo filter" commands.
Default
It is assumed that this option has not been set.
5.3.4.2
vlan ip6qos aclmap
Function
Set IPv6 QoS of VLAN
Available Model
XG0224 / XG0448
Syntax
vlan <vid> ip6qos aclmap <count> <action> <value> <acl>
Options
<vid>
• VLAN ID
Specify the VLAN ID with a decimal value from 1 to 4094
<count>
• Prioruty
Specify the priority of the QoS definition with a decimal value
A smaller value is a higher priority
If multiple <action> are executed for the same packet and if they conflict with each
other, the <action> with a higher priority is executed.
The specified value is sorted and renumbered in sequence. If a filtering definition with
the same value already exists, the existing one will be changed.
<action>
• dscp
Rewrite the "dscp" value (the high-order 6 bits in the Traffic class field of IPv6 header),
if packets thatmatch the "acl ip6", "acl icmp", "acl tcp", or "acl udp" definition of access
control list are IP packets.
• queue
Change the queue at the output port that is used to output the input packets that match
the"acl ip6", "acl icmp", "acl tcp", or "acl udp" definition of access control list.
<value>
• Rewrite Value
If dscp is selected in <action>:
• <dscp_value>
Set the rewrite "dscp" value with a decimal value from 0 to 63
If queue is selected in <action>:
• <queue_value>
Specify a queue number of the output port to be used. A larger value indicates a queue
with a higher output priority.
Range
Model
0 to 511
XG0224 / XG0448
Range
Model
0 to 7
XG0224 / XG0448