FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 435)

XG Series User's Guide Chapter 5 Command Reference
Routing Table Entry Display Commands 435
Flag : The entry type is displayed. The details are as follows.
U (Up): Indicates that the route is enabled.
G (Gateway): Indicates the route which requires an intermediate
routing such as gateway.
H (Host): Indicates the host entry.
S (Static): Indicates the static route.
R (Reject): Indicates the discarded route (with ICMP unreach
transmission).
B (Blackhole): Indicates the discarded route (without ICMP unreach
transmission).
Interface : The destination interface is shown.
2) Entry
The number of entries, excluding the route entries used inside the device, is
displayed.