FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 270)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 270
5.15.1.16 snmp rmon
Function Set the RMON function.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp rmon <mode>
Options
<mode>
Specify whether to enable or disable the RMON function.
• on
Use the RMON function.
• off
Do not use the RMON function.
Use Mode Configuration mode (admin class)
Explanation Set whether to use the RMON function. When not using this function, the RMON-MIB
cannot be obtained.
Default It is assumed that the RMON function is used.
5.15.1.17 snmp user name
Function Set a SNMP user name.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [<number>] name <user_name>
Options
<number>
• User definition number
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
<user_name>
• SNMP user name
Specify a SNMP user name with up to 32 characters.
Use Mode Configuration mode (admin class)
Explanation Set a SNMP user name under SNMPv3. Be sure to set it when using the SNMPv3
function.
Default It is assumed that a SNMP user name is not set.
snmp rmon on