MiTAC 8050QMA - Manual (Page 103)

102
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
7.3 Error Codes-2
Following is a list of error codes in sequent display on the MINI PCI debug board.
Special Init of COMM and LPT Ports 3Fh
Update NUMLOCK status 3Eh
Search and Init the Mouse 3Dh
Initialize the Hardware Vectors 3Ch
Test for RTC ticking 3Bh
Test if 18.2Hz Periodic Working 3Ah
Setup Cache Controller 39h
Update Output Port 38h
Protected Mode Exit Successful 37h
RAM Test Complete 36h
Protected Mode Entered Safely(2) 35h
Test, Blank and Count all RAM 34h
Test Keyboard Command Byte 33h
Test Keyboard Interrupt 32h
Test if Keyboard Present 31h
Special Init of Keyboard Controller 30h
POST Routine Description Code
Jump into Bootstrap Code 49h
Dispatch to Operate System Boot 48h
OEM functions before Boot 47h
Test for Coprocessor Installed 46h
Update NUMLOCK Status 45h
OEM’s Init of Power Management 44h
Initialize Option ROMs 43h
Initialize the Hard Disk 42h
Initialize the Floppies 41h
Configure the COMM and LPT ports 40h
POST Routine Description Code
MiTac Secret
Confidential Document