Mitac secret confidential document – MiTAC 8050QMA User Manual
Page 5
4
80
80
50QMA
50QMA
N/B Maintenance
N/B Maintenance
1.1 Introduction
1. Hardware Engineering Specification
This document describes the brief introduction for MiTAC 8050QMA portable notebook computer system.
1.1.1 General Description
1.1.2 System Overview
The MiTAC 8050Q model is designed for Intel Dothan processor with 533MHz FSB with Micro-FCPGA package.
This system is based on PCI architecture and is fully compatible with IBM PC/AT specification, which has
standard hardware peripheral interface. The power management complies with Advanced Configuration and Power
Interface. It also provides easy configuration through CMOS setup, which is built in system BIOS software and can
be pop-up by pressing F2 key at system start up or warm reset. System also provides icon LEDs to display system
status, such as AC Power indicator, Battery Power indicator, Battery status indicator, HDD,CD-ROM, NUM
LOCK, CAP LOCK, SCROLL LOCK, Wireless on/off Card Reader Accessing. It also equipped with LAN, 56K
Fax MODEM, 4 USB port, S-Video and audio line in/out , external microphone function.
The memory subsystem supports DDR or DDR2 SDRAM channels (64-bits wide).
The 915PM MCH Host Memory Controller integrates a high performance host interface for Intel Dothan processor,
a high performance PCI Express interface, a high performance memory controller and Direct Media Interface
MiTac Secret
Confidential Document