Mitac secret confidential document – MiTAC 8050QMA User Manual

Page 31

Advertising
background image

30

80

80

50QMA

50QMA

N/B Maintenance

N/B Maintenance

Support 2 PWM channels, 2 D-A and 8 A-D converters

Reduce Firmware burden by Hardware PS/2 decoding

Support 72 useful GPIOs totally

Support Flash utility for on board re-flash

Support ACPI

Hardware fast Gate A20 with software programmable

IDE HDD

1.2.13 Hard Disk Drive

The ICH6 IDE controller features one set of interface signals that can be enabled, tri-stated or driven low. The IDE
interfaces of the ICH6 can support several types of data transfers:

Programmed I/O (PIO): processor is in control of the data transfer

8237 style DMA: DMA protocol that resembles the DMA on the ISA bus, although it does not use the 8237 in

the ICH6. This protocol off loads the processor from moving data. This allows higher transfer rate of up to
16MB/s

MiTac Secret

Confidential Document

Advertising