MiTAC 8050QMA - Manual (Page 70)

69
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
2.3.10 Inverter Board
Disassembly
1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR, modem card, LCD
assembly and LCD panel. (Refer to section 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6, 2.3.7, 2.3.8 and 2.3.9
Disassembly)
2. Remove the one screw fastening the inverter board, then free the inverter board. (Figure 2-24)
Figure 2-24 Free the inverter board
Reassembly
1. Fit the inverter board back into place and secure with one screw.
2. Replace the LCD panel, LCD assembly, modem card, DDR, CD/DVD-ROM drive, hard disk drive, CPU
keyboard and battery pack. (Refer to previous section reassembly)
MiTac Secret
Confidential Document