MiTAC 8050QMA - Manual (Page 64)

63
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
2.3.7 Modem Card
Figure 2-12 Remove two screws Figure 2-13 Disconnect the cord
1. Reconnect the cord and fit the modem card.
2. Fasten the modem card by two screws.
3. Replace the CPU cover by seven screws. (Refer to step 3 of section 2.3.3 Reassembly).
4. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (Refer to section 2.3.1 Disassembly)
2. Remove seven screws fastening CPU cover. (Refer to step 2 of section 2.3.3 Disassembly)
3. Remove two screws fastening the modem card. (Figure 2-12)
4. Lift up the modem card and disconnect the cord. (Figure 2-13)
Reassembly
MiTac Secret
Confidential Document