MiTAC 8050QMA - Manual (Page 57)

56
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
Figure 2-3 Free the keyboard
Reassembly
1. Reconnect the keyboard cable and fit the keyboard back into place.
2. Replace the keyboard fasten the five latches.
3. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
4. Slightly lift up the keyboard and disconnect the cable from the system board, then separate the keyboard.
(Figure 2-3)
MiTac Secret
Confidential Document