MiTAC 8050QMA - Manual (Page 65)

64
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
2.3.8 LCD ASSY
Figure 2-14 Remove the eighteen screws
and separate the antenna
Figure 2-15 Free the top cover
Disassembly
1. Remove the battery pack, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR and modem card.
(See sections 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6 and 2.3.7 Disassembly)
2. Remove the eighteen screws fastening the housing and separate the antenna from the Mini PCI compartment .
(Figure 2-14)
3. Disconnect the touch pad’s cable from the system board and remove the two screws, then free the top cover.
(Figure 2-15)
MiTac Secret
Confidential Document