MiTAC 8050QMA - Manual (Page 58)

57
80 80 50QMA 50QMA N/B Maintenance N/B Maintenance
2.3.3 CPU
Figure 2-4 Remove the seven screws Figure 2-5 Free the heatsink
Disassembly
1. Remove the battery pack. (Refer to section 2.3.1 Disassembly)
2. Remove the seven screws fastening the CPU cover. (Figure 2-4)
3. Remove the four spring screws and two screws that secure the heatsink upon the CPU and disconnect the fan’s
power cord from the system board. (Figure 2-5)
MiTac Secret
Confidential Document