Mitac secret confidential document – MiTAC 8050QMA User Manual
Page 68
Advertising
67
80
80
50QMA
50QMA
N/B Maintenance
N/B Maintenance
2.3.9 LCD Panel
Disassembly
1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR, modem card and LCD
assembly. (Refer to section 2.3.1, 2.3.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6, 2.3.7 and 2.3.8 Disassembly)
2. Remove the two rubber pads and two screws on the corners of the panel. (Figure 2-20)
3. Insert a flat screwdriver to the lower part of the LCD cover and gently pry the frame out. Repeat the process
until the cover is completely separated from the housing.
4. Remove the ten screws and disconnect the cable. (Figure 2-21)
Figure 2-21 Remove the ten screws and
disconnect the cable
Figure 2-20 Remove LCD cover
MiTac Secret
Confidential Document
Advertising